Machines

Cleaning the machine is not at all time consuming. You will be done in no more than 10 minutes. The machine will be completely cleaned and ready to use. Check out our instructional video for a step by step guide for cleaning your WEnutbutter machine.

Absolutely. The machine can be configured with a start-release button, which stops the grinding process when released. All moving parts of the machine are entirely enclosed in the chassis, therefore you could not reach them with your fingers without taking the machine apart first.

All parts fit together in a very straightforward manner. This means the machine is very easy to take apart and put together again. Our instructional video should clear up any potential confusion.

It is incredibly safe. All moving parts are 100% inox, the machine is therefore very suited for use in stores as well as other branches such as hotels. Inox provides as secure, hygienic and health-centered nut butter mill.

Absolutely, our manual contains recommendations regarding nuts. All nuts smaller - in length and diameter - than 22 to 24mm can be used without issue.

You can request a price by filling in the quotation request form. We'll send you a custom quotation, taking in consideration shipping fees etc.

We recommend roasting or burning nuts just before placing them in the hopper for the best, most easily spreadable paste. Ground raw nuts lead to a less spreadable result.

Effectively never. Our parts are of such high quality that regular cleaning is the only required maintenance. Should a part get lost, we'll send you a replacement post-haste.

Incredibly safe. There's a start/release button on the front of the machine, which the customer can use. At the rear of the machine, there's an on/off button, which can completely shut off power to the motor. Therefore two additional steps are required to activate the machine. This also means there are two easily accessible buttons to shut down the machine in case of unexpected emergency.